Phoenix Contact

An issue was discovered on Phoenix Contact AXC F 2152 (No.2404267) before 2019.0 LTS and AXC F 2152 STARTERKIT (No.1046568) before 2019.0 LTS devices. Unlimited physical access to the PLC may lead to a manipulation of SD cards data. SD card manipulation may lead to an authentication bypass opportunity.

On Phoenix Contact PLCnext Control Devices versions before 2021.0 LTS a specially crafted LLDP packet may lead to a high system load in the PROFINET stack. An attacker can cause failure of system services or a complete reboot.

A Cross-site Scripting issue was discovered in PHOENIX CONTACT FL COMSERVER BASIC 232/422/485, FL COMSERVER UNI 232/422/485, FL COMSERVER BAS 232/422/485-T, FL COMSERVER UNI 232/422/485-T, FL COM SERVER RS232, FL COM SERVER RS485, and PSI-MODEM/ETH (running firmware versions prior to 1.99, 2.20, or 2.40). The cross-site scripting vulnerability has been identified, which may allow remote code execution.

An issue was discovered on Phoenix Contact AXC F 2152 (No.2404267) before 2019.0 LTS and AXC F 2152 STARTERKIT (No.1046568) before 2019.0 LTS devices. Protocol Fuzzing on PC WORX Engineer by a man in the middle attacker stops the PLC service. The device must be rebooted, or the PLC service must be restarted manually via a Linux shell.

On Phoenix Contact PLCnext Control Devices versions before 2021.0 LTS an attacker can use the knowledge gained by reading the insufficiently protected sensitive information to plan further attacks.

On Phoenix Contact mGuard Devices versions before 8.8.3 LAN ports get functional after reboot even if they are disabled in the device configuration. For mGuard devices with integrated switch on the LAN side, single switch ports can be disabled by device configuration. After a reboot these ports get functional independent from their configuration setting: Missing Initialization of Resource

Improper Input Validation vulnerability in PHOENIX CONTACT FL/TC MGUARD Family in multiple versions may allow UDP packets to bypass the filter rules and access the solely connected device behind the MGUARD which can be used for flooding attacks.

In Phoenix Contact FL SWITCH SMCS series products in multiple versions fragmented TCP-Packets may cause a Denial of Service of Web-, SNMP- and ICMP-Echo services. The switching functionality of the device is not affected.

The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions 1.0 to 1.34 leaks private information in firmware images.

All Phoenix Contact managed FL SWITCH 3xxx, 4xxx, 48xx products running firmware version 1.0 to 1.33 allow reading the configuration file by an unauthenticated user.

An Information Exposure issue was discovered in PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, and 48xxx Series products running firmware Version 1.0 to 1.32. A remote unauthenticated attacker may be able to use Monitor Mode on the device to read diagnostic information.

Phoenix Contact FL IL 24 BK-PAC allows remote attackers to cause a denial of service (hang) via (1) unspecified manipulations as demonstrated by a Nessus scan or (2) malformed input to TCP port 502.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 an authenticated, remote attacker with admin privileges is able to read hardcoded cryptographic keys allowing to decrypt an encrypted web application login password.

In PHOENIX CONTACTs TC ROUTER and TC CLOUD CLIENT in versions prior to 2.07.2 as well as CLOUD CLIENT 1101T-TX/TX prior to 2.06.10 an authenticated remote attacker with admin privileges could upload a crafted XML file which causes a denial-of-service.

In Phoenix Contact FL MGUARD 1102 and 1105 in Versions 1.4.0, 1.4.1 and 1.5.0 a user with high privileges can inject HTML code (XSS) through web-based management or the REST API with a manipulated certificate file.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges is able to gain limited read-access to the device-filesystem through a configuration dialog within the embedded Qt browser .

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges is able to gain limited read-access to the device-filesystem within the embedded Qt browser.

An Improper Authentication issue was discovered in Phoenix Contact GmbH mGuard firmware versions 8.3.0 to 8.4.2. An attacker may be able to gain unauthorized access to the user firewall when RADIUS servers are unreachable.